Notice on saving energy consumption of refrigerator

1、 The ambient temperature of the refrigerator shall not be overheated
The ambient temperature has a direct impact on the power consumption of the refrigerator. The increase of ambient temperature will slow down the heat dissipation of the refrigerator, and the slow drop of temperature in the cabinet will lead to longer startup time and increased power consumption. The refrigerator should be placed as far away from the heat source as possible, preferably in a ventilated and shady place.
2、 Constant adjustment of thermostat gear
Each freezer is equipped with a temperature controller. Adjust the gear to balance the temperature in the freezer. The higher the gear of the temperature controller, the lower the temperature in the freezer. When the freezing chamber reaches a certain value, it is difficult to drop 1 ℃ every time. The colder it is, the harder it is to drop. If the startup time is long due to low temperature, it is advisable to manually lower the temperature of the temperature controller, which will significantly shorten the startup time and help save energy.
3、 Minimize the opening times of the refrigerator
Opening the door of the refrigerator causes the temperature inside the refrigerator to rise and the temperature controller fails to reach the shutdown temperature, which causes the compressor to operate for a long time and increases the power consumption.
4、 The freezer should be defrosted in time
Frost is a poor conductor of heat. It covers the surface of the evaporator and acts as a thermal insulation layer between the evaporator and the food in the box. It affects the heat exchange between the evaporator and the food in the box, makes the temperature in the cabinet not lower, reduces the refrigeration function of the freezer, adds power consumption, and even makes the compressor run for a long time and become hot and burned. If it is not defrosted for a long time, the freezer will be full of peculiar smell.