news

Knowledge notices to save energy consumption of refrigerators

Update:28-01-2023
Summary:

1. The ambient temperature of the freezer should not be […]

1. The ambient temperature of the freezer should not be overheated
The ambient temperature has a direct impact on the power consumption of the freezer. As the ambient temperature rises, the heat dissipation of the freezer will slow down, and the slow drop in the temperature inside the cabinet will lead to longer start-up time and increased power consumption. The freezer should be placed as far away from heat sources as possible, preferably in a ventilated and shady place.

2. The thermostat gear is often adjusted
Each freezer has a thermostat, adjust the gear to balance the temperature in the freezer, the higher the temperature controller gear, the lower the temperature in the freezer. After the freezer reaches a certain value, it is difficult to drop every 1°C, and the colder it is, the harder it is to drop. If the booting time is long due to the low temperature, you may wish to manually lower the temperature of the thermostat, and the booting time will be significantly shortened. Conducive to energy saving.

3. Minimize the number of times the freezer is opened
Opening the door of the freezer will cause the temperature inside the freezer to rise, and the thermostat will not reach the shutdown temperature, which will cause the compressor to work for a long time and increase power consumption.

4. The freezer should be defrosted in time
Frost is a poor conductor of heat. It covers the surface of the evaporator and becomes a heat insulation layer between the evaporator and the food in the box, affecting the heat exchange between the evaporator and the food in the box, so that the temperature in the cabinet cannot drop, and the freezer will drop. The cooling function of the compressor increases, power consumption is increased, and even the compressor runs for a long time and heats up and burns out. Without defrosting for a long time, the freezer will be full of peculiar smell.

CONTACT US

Ningbo Hicon Industry Technology Co., Ltd.

Add:No.55, Binhai 4th Road, Hangzhou Bay New Zone, Ningbo, Zhejiang, China

Tel: +86-574-58580619
Fax: +86 574-63302029
E-mail: [email protected]

https://www.hicon-international.com/

0
Views: 232